Kinze ISOBUS Electronics Package (4900) Rev. 4/14 Manuel d'utilisateur Page 48

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 60
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 47
M0250ISOBUS
44 Rev. 4/14
TM
POPULATION MONITORING
Tap on the box in the VALUE column to adjust each setting. A number pad will appear to enter the desired setting. The
singulation, low population, and high population alarms can be toggled ON or OFF from this screen as well.
High/Low Population Threshold
This sets the threshold for where a visual and audible alarm for high or low population will appear while planting. If the
threshold is set at 10%, that means an alarm will appear if the population for a row goes above 110% or below 90%.
Singulation Threshold
This sets the threshold for where a visual and audible alarm for low singulation will appear while planting. If the threshold
is set at 5%, that means an alarm will appear if the singulation is below 95%.
Alarm Response Time
This sets the amount of time the alarm condition must exist before the visual and audible alarm comes up. If the
response time is set to 3 seconds, the population has to be above the threshold for 3 seconds before a high population
alarm is displayed.
Seed Diameter
The seed diameter determines how sensitive the seed sensor is. Larger diameters will be less sensitive and smaller
diameters will be more sensitive.
If the population is showing high on screen and ground checks have shown that the correct population is being planted,
increase the seed size gradually until the correct population shows on screen. If the population is reading low, decrease
the seed size. Tap on the TABLE box for average seed diameter information.
Diagnostics
The diagnostics display the seeds per second for each row.
Settings
Reset to Factory
Settings Button
Vue de la page 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 59 60

Commentaires sur ces manuels

Pas de commentaire