Kinze ISOBUS Electronics Package (4900) Rev. 4/14 Manuel d'utilisateur télécharger pdf (Page 41)

ISOBUSM0250

Rev. 4/14 37

ALARMS

If a threshold is crossed (either high or low), an alarm screen will appear and the data cell with the corresponding data

will turn red.

There are two sections to the alarm screen: the large box at the top and the box at the bottom.

The large box will contain the most current alarm. The function will be listed ﬁrst, followed by the alarm state (i.e. high

or low), then the position or row. The box at the bottom of the screen contains all of the active alarms as well as a

counter of how long the alarm has been active. The up and down arrows on the right side of the screen can be used

to scroll through alarms.

If you select ACK ALL, all alarms will be acknowledged and you will return to the plant screen. Acknowledging the

alarm will not clear it. The alarm box will appear at the top of the plant screen until you correct the problem or the

value returns to inside the threshold and the alarm clears itself.

Note: No matter what screen you are in, the alarm will always pop up over it.

If you acknowledge the alarms and return to the plant screen a status box with the alarm status will appear at the top

of the screen. It is red and will say ALARMS and then will state how many alarms are active. If you need to return to

the list of alarms simply press this red button and you will return to the list of alarms.

Note: See settings to change alarm thresholds.

3:00 PM

ALARM

Vacuum

Low

Position: Left

ACK

ALL

Vacuum

Position: Right - Low

Current Alarm

All active alarms

Alarms

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Pas de commentaire

Kinze ISOBUS Electronics Package (4900) Rev. 4/14 Manuel d'utilisateur Page 41